Flange Lock Nuts

The flange lock nuts and the general hexagon nut are basically the same in size and thread specification, but compared with the hexagon nut, the gasket and the nut are integrated, and there are anti-skid tooth patterns on the bottom, which increases the nut and the workpiece. Compared with the combination of ordinary nut and washer, it is firmer and has greater tensile force. The material is generally carbon steel, stainless steel.

1/2"-20 Lock Nuts

1/2"-20 Lock Nuts Nylon Insert Lock Nut Stainless Steel, and Nylon Insert Lock Nut Steel including Grade 2, Plain Zinc Plated, Zinc Yellow, Grade 8, Black Oxide, Zinc Plated, Zinc Yellow and other surface treatmentsThe 1/2"-20 Lock Nutsis most suitable for the fastening of moving...

ASME B 18.16.6 - 2008 Nylon Insert Lock Nuts

The ASME B 18.16.6 - 2008 Nylon Insert Locknuts is most suitable for the fastening of moving parts. It has excellent anti-vibration performance, strong wear resistance and shear resistance, and good reuse performance. ASME B 18.16.6 - 2008 Nylon Insert Locknuts A large number of uses show that...

DIN 931 Hexagon Head Cap Screws/Bolts Part Thread

DIN 931 Hexagon Head Cap Screws/Bolts are externally threaded fasteners with a hexagonal washer faced head and a chamfered tip to facilitate mating with an internally threaded component.